Qingdao Yehua Plastic Machinery Co.,Ltd

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
Fault Problems In PP PE PVC PA Plastic Pipe Production Line
- Jun 22, 2017 -

Fault Problems in PP PE PVC PA Plastic Pipe Production Line
 1. PP PE PVC PA Plastic Pipe Production Line production of the outer surface rough. Check the mold core temperature and make appropriate adjustments; adjust the flow of water; check the head, barrel and other heating ring is damaged; clean up the mold; to check the mold temperature and reduce the water temperature; Check raw material parameters and so on.

2. PP PE PVC PA Plastic Pipe Production Line production pipe surface surface groove marks. Adjust the water pressure; check the die, cutting machine, sizing sets of hardware whether there are burrs or debris; so that the tube cooling evenly.

3. PP PE PVC PA Plastic Pipe Production Line production pipe without vacuum. Check whether the vacuum pump is working properly; check the core mold is blocked; check the vacuum pump inlet is blocked; check the vacuum tube is leak.

4. Polyethylene polyethylene plastic pipe production line production of the inner surface of the pipe has a jitter ring. Adjust the two-chamber vacuum, the posterior chamber is higher than the front room; adjust the sizing sleeve, so that the water even; check whether the traction machine jitter; check the vacuum seal is too tight.

5. PP PE PVC PA Plastic Pipe Production Line production pipe wall thickness is not uniform. Adjust the sprinkler and vacuum setting machine, so that the pipe cooling evenly; check the screw inside the mold is loose; in the mold to adjust the wall thickness.
 Although the summer has high temperature and heavy rain, but the production can not stop, polyethylene polyethylene plastic pipe production line still have to continue to work, but the use of the production line when there are many considerations.

It is true that there are high temperatures and heavy rains in summer, and these weather will also have an impact on the normal operation of the PP PE PVC PA Plastic Pipe Production Line. In the production line for pipe production, pay attention to the temperature inside the production workshop, especially in the summer such a high temperature season, but also to ensure that the workshop temperature is constant, suitable for production, so as to avoid the production line in the high temperature to stop production, delay production schedule.

Heavy rain is very dangerous, whether it is indoor or outdoor are so, so rainstorms as far as possible not to start PP PE PVC PA Plastic Pipe Production Line equipment. After the rain to start the production line equipment, to the switch, the internal wire and other thorough checks to prevent the production line damp lead to internal leakage, and even lead to equipment burned and many other situations. The use of pipe production lines in summer, equipment safety is very important.
 Polyethylene polyethylene plastic pipe production line is used for pipe production line. The main configuration is: automatic feeding machine, single / twin screw extruder, extrusion die, vacuum sizing box, traction machine, cutting machine, stacking frame and other components. Is the shape of the inner surface of the pipe parts, the core is connected with the thread and the shunt connected to ensure that the core and the shunt concentric. Core shrinkage angle β is smaller than the divergence angle α of the shunt, and the angle β decreases with the increase of the melting degree, and the hard tube is generally = β10-30 °.

Polyethylene polyethylene plastic pipe production line for the production of a good softness; corrosion resistance, anti-scale; high temperature, high pressure; long life; simple and fast construction and other characteristics, suitable for residential, villa cold, hot water and heating Transportation, garage, expressway piping; zoo, botanical garden, greenhouse, chicken farm piping; swimming pool, sauna, and so on; the use of office buildings, markets, theaters, barracks and other public water supply and floor radiant heating; Of the cold, hot water pipes; health with: water pipes, hot water pipe piping; industrial water pipes and other aspects of the pipe.